The Dynamic Series

Please email for all Autec Radio Remote enquires. 

Autec’s New Generation of Industrial Radio Remote Controls

The Dynamic radio remote has been designed to control hydraulic equipment including HIABS, boom loading cranes, lorry mounted cranes, concrete pumping vehicles and all other proportional and digital operated hydraulic valves. 


The new FJS, FJL and FJM joystick controllers offer proportional and digital commands with Data Feedback function, with information displayed on an OLED graphic display for mobile hydraulic applications. The standard version has 8 proportional and 15 on/off commands. The systems are highly customisable and programmable, thus enabling function extension up to 12 proportional and 64 on/off commands for the most complex applications. Commands can be programmed so as to obtain logic functions that meets our customers' specific needs.

All models satisfy the strictest safety standards, exceeding and anticipating the requirements of current regulations: the Stop protection safety function fulfils the requirements of category 4 / PL (according to the EN ISO 13849-1) and the protection against unintended movements of the actuators from their resting position (UMFS) fulfils category 3 / PL d (according to the EN ISO 13849-1).

FSA technology (Flex Safe Architecture)

The FSA technology is used in the whole Dynamic series and performs new generation features: bi-directional communication, dynamic frequency scan and search in a broad bandwidth. Thanks to the new radio module, radio remote controls constantly and automatically scan the working frequency band and move to a free frequency, many times per second, without interruption for the remote controlled machine. The new communication protocols ensure paramount resistance to interference, even when working in "crowded" environments with many radio devices.


The whole series has been designed to allow a lot of configuration options of both transmitting and receiving units, in order to meet the needs of countless applications.

FJM, tailor made solutions

While the whole Dynamic series offers the chance to customise its systems, configurability is definitely a strong point for the FJM transmitting unit. It offers in fact the widest range of commands, thus resulting suitable for complex applications and special machines with several functions (i.e. aerial work platforms, harbour and offshore cranes, drilling machines, recycling machines...) Furthermore, a large graphic display can be mounted on this unit, where icons, measurements or descriptions coming from the controlled machine are displayed.


Thanks to the two-way radio communication, all transmitting units in the Dynamic series can display messages and measurements coming from the controlled machine on graphic OLED displays and/or through high performance LEDs. OLED (Organic Light-Emitting Diodes) displays use state of the art technology offering several advantages: low power consumption, wide viewing angle, improved brightness and contrast levels, reduced thickness.


A 1.54" display is mounted on FJS and FJL transmitting units, whereas the FJM unit may also mount a 2.7" display. In both cases, information appears as icons, descriptions or measurements, depending on the desired settings. A multifunction rotary switch is present beside the display on the FJM unit, to quickly browse through the different menus.

Advanced System Features

Automatic Channel Search Function

Automatic Channel Search function chooses a free frequency, if interference occurs the radio communication automatically moves to a free channel, while operation is not interrupted.

Range Limiting

The Range Limiting function allows the maximum distance within which the transmitting unit must remain to start up the system and to optionally limit the radio remote control working range.

Data Feedback

The Range Limiting function allows the maximum distance within which the transmitting unit must remain to start up the system and to optionally limit the radio remote control working range.

Multiple Systems

The “Data Feedback” option enables the visualisation on a display and/or through LEDs of all information coming from sensors installed on the controlled machine.

Autec Dynamic Radio System Brochure
Autec Dynamic Radio System Brochure
DYNAMIC - Email.pdf
Adobe Acrobat document [3.2 MB]

Latest News

Contact Details

RHC Lifting Limited - HQ

Lawrence Drive

Stover Trading Estate

Yate, Bristol

BS37 5PG


Tel: 01454 332270


Autec Enq: 

RHC Lifting Limited - Yeovil 

RHC Lifting Limited

C/O Leonardo Helicopters

Lysander Road


BA20 2YB


Tel: 01935 704076

RHC Lifting Limited - Plymouth 

11 Mary Seacole Road




Tel: 01752 250501

Current Vacancies

2 x Crane Service / Installation Engineers (London & Yorkshire)Current Vacancies


The Lifting Equipment Engineers Association LEEA

RHC Lifting are proud members of LEEA - The Lifting Equipment Engineers Association

IS0 9001:2008 Accreditation ISO 9001

RHC Lifting are an ISO 9001:2008   accredited company

safecontractor Approval Safe - contractor

RHC Lifting are Safe contractor Approved

Social Media

Print Print | Sitemap
© RHC Lifting Limited, Lawrence Drive, Stover Trading Estate, Yate, Bristol, BS37 5PG
Yeovil - RHC Lifting Limited, C/O Leonardo Helicopters, Lysander Road, Yeovil, BA20 2YB
Plymouth - RHC Lifting Limited, 11 Mary Seacole Road, Plymouth, PL1 3JY