Automated Guided Vehicles

RHC Lifting Limited has commissioned and supplied its first Automated Guided Vehicle (AGV) to GKN Aerospace’s new state of the art composite wing structures manufacturing and assembly facility, near Bristol, which was officially opened on Friday 27th April by George Osborne.


RHC Lifting designed, manufactured and commissioned the AGV, which is to be used to transport the wing spar mould tools to different manufacturing processes around the facility.  The AGV combined with the multi-latching crane system and vacuum lifting beams already installed by RHC Lifting gives GKN Aerospace a complete solution to their material handling problems onsite.


This is RHC Lifting Limited first AGV which utilized their vast industry experience and strong supplier relationships to help deliver the AGV. The AGV brought together a number of components from numerous companies who are industry leaders in their own specialty including, the wheel units from CFR, the lifting jacks from PowerJacks Limited,  the battery units are supplied by Powercell Industrial Battery Engineers and the control system from Siemens.


The AGV has an overall size of 9.2m x 1.1m x 0.5m, with a self weight of 3.7ton, and has a lifting capacity of 10 tonnes. The AGV can move components around the factory floor up to speeds of 55m/min and is powered by sealed lead acid batteries which have the ability to operate the AGV continuously throughout a single 9 hour shift.  


The AGV is controlled by a trained operator via an Autec Dynamic FJM radio controller to drive, steer and lift. The 8 independently driven wheels mean that the AGV can move sideways and turn on the spot, allowing for precision positioning. To remove human error and reduce the risk of damaging the wing spars, the AGV uses a number of ultra-sonic sensors located on the front, sides and rear to automatically position the AGV into the tool and autoclave.


The AGV is aligned to the tool manually, to the best of the operator’s judgment and the ultra-sonic sensors on the front and side of the AGV ensures that the AGV is automatically aligned as it enters the tool. Flags in the tool are used for the final stop position, to align with the 8 lift points and indexing sensors. The same process will be used for entry and alignment to the autoclave with a displacement laser sensor detecting flags in the autoclave for its various stop position.


The travel motion of the AGV remains manually operated from the Autec radio controller but is automatically set to a slow speed as the tool is entered and until it is cleared. A SICK Laser Scanner positioned on the front and the rear of the AGV is an anti-collision precaution, and cuts movement if an obstacle is seen.


The proximity indexing system automatically recognises which of the spar tools the AGV is entering and ensures that the alignment under the lifting points of the tool is correct. The Autec FJM radio transmitter also has data feedback to display the tool number for the operator to clearly see on a 2.7” display.


After the success of the first AGV, GKN Aerospace has already placed the order for a second vehicle and there is provision for a further two vehicles in the future. RHC Lifting is believed to be the only company in the United Kingdom currently producing AGVs with lifting capacity of this size. With AGVs becoming increasingly used in manufacturing processes, in a growing number of industries, RHC Lifting hopes that this successful diversification will create many new opportunities in a rapidly expanding market.


One of RHC Lifting’s Directors, Philip Goodway, said “with this AGV, RHC Lifting has shown its ability to develop and produce another highly technical and customised material handing solution which matches GKN Aerospace’s requirements and high standards.”


GKN Aerospace will now receive RHC Lifting’s after sales care package including, operator training, servicing, statutory inspections and provide 24/7 breakdown cover for a two year warrant period.




Notes to Editors


1. More photographs available on request.

Picture 1 – RHC Lifting’s first Automated Guided Vehicle (AGV).

Picture 2 – Side View of the Automated Guided Vehicle (AGV).

Picture 3 – George Osborne opening GKN Aerospace’s new state of the art composite wing structures manufacturing and assembly facility, in Bristol, UK

2. RHC Lifting Limited was established in 2001 with founding members and equal shareholders, Philip Goodway, Tony Morgan and Andy Cayzer. RHC Lifting Limited provides solutions to problems within the lifting and height safety industries, including; statutory inspections & servicing, installations projects and modernisation of all lifting equipment, across the UK. RHC Lifting Limited currently employs 22 permanent members of staff and has the biggest team of lifting engineers in the South West, with further growth planned for 2012.  

3. GKN Aerospace has invested £170m to create a new state of the art composite wing structures manufacturing and assembly facility just outside Bristol, UK.  This facility forms a key part of the company’s global aerostructures business and represents an international centre of excellence in composite wing structure design and production. It will be at the heart of the company’s drive to take a significant percentage of the global wing structures market over the next 30 – 40 years.

4. For further information, photographs or interview requests please contact:

Gary Crawford, Marketing Manager

Phone: 01454 332270




Latest News

Contact Details

RHC Lifting Limited - HQ

Lawrence Drive

Stover Trading Estate

Yate, Bristol

BS37 5PG


Tel: 01454 332270


Autec Enq: 

RHC Lifting Limited - Yeovil 

RHC Lifting Limited

C/O Leonardo Helicopters

Lysander Road


BA20 2YB


Tel: 01935 704076

RHC Lifting Limited - Plymouth 

11 Mary Seacole Road




Tel: 01752 250501

Current Vacancies

2 x Crane Service / Installation Engineers (London & Yorkshire)Current Vacancies


The Lifting Equipment Engineers Association LEEA

RHC Lifting are proud members of LEEA - The Lifting Equipment Engineers Association

IS0 9001:2008 Accreditation ISO 9001

RHC Lifting are an ISO 9001:2008   accredited company

safecontractor Approval Safe - contractor

RHC Lifting are Safe contractor Approved

Social Media

Print Print | Sitemap
© RHC Lifting Limited, Lawrence Drive, Stover Trading Estate, Yate, Bristol, BS37 5PG
Yeovil - RHC Lifting Limited, C/O Leonardo Helicopters, Lysander Road, Yeovil, BA20 2YB
Plymouth - RHC Lifting Limited, 11 Mary Seacole Road, Plymouth, PL1 3JY